Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in San Mateo?
Replacing a garage door spring in San Mateo typically runs $210 to $400 per spring, and most jobs involve replacing both springs at once. A matched pair usually costs about twice that range because the springs wear at the same rate and a fresh spring paired with an old one fails early. The number you get in writing after we look at the door is the number that counts, and we set it per job by the written estimate.
We work on the door you already have, whether it’s a Clopay steel panel or a Raynor door on an older San Mateo home. Spring work is the one garage door repair where the wrong guess is genuinely dangerous, so a careful look up front matters more than a low bid. Our technicians have up to 11 years of experience with torsion and extension spring systems, and we’ll tell you plainly what your door needs before anyone touches it.
Key Takeaways
- One spring: $210 to $400. A matched pair: roughly $420 to $800.
- Most springs are replaced as a pair, not one at a time.
- Written estimate sets the final price, and it’s free.
- We answer 24/7 at (877) 373-8927.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually fall out for a spring job in San Mateo. These are typical estimated ranges for our market, and your written estimate settles the final figure.
| Item | Typical Estimated Range |
|---|---|
| One torsion spring (standard door) | $210 – $400 |
| Matched pair, replaced together | About twice the single-spring range |
| Spring repair (re-tensioning, cable drum issues) | $210 – $400 |
| Related cable repair | $155 – $295 |
| Related track realignment | $140 – $285 |
| Roller replacement (often done at the same visit) | $130 – $260 |
| Opener repair if the motor is also failing | $140 – $380 |
| General garage door repair call | $175 – $710 |
| New door installation, if the door body is beyond saving | $825 – $2595 |
What pushes a spring job up or down: the number of springs, the door’s weight, and how much surrounding hardware has worn out alongside the spring. A heavier double-car door with high-lift track takes a stiffer spring than a single-car door, and that spring costs more. If the cables are frayed or the drums are scored, we’ll flag it rather than leave worn parts paired with a fresh spring. A door that’s been running on a broken spring for a while often needs rollers or a track adjustment too, and those add to the total. The written estimate breaks it all out so you’re not guessing.
What Affects Spring Replacement Pricing in San Mateo
- Spring type and size. Torsion springs mounted across the top of the door and extension springs mounted along the sides cost differently, and a door’s weight determines the spring gauge. A heavier insulating door on a San Mateo hillside home needs a stiffer spring than a plain single-car door on a flat lot.
- One spring or a pair. When both springs are the same age, replacing them together saves you a second visit later. If only one failed and the other is clearly fresh, we’ll tell you that too.
- Condition of the cables and drums. Springs don’t fail in isolation. Worn cables or scored drums mean added cost, and skipping them risks the new spring doing all the work on tired parts.
- Door weight and design. Carriage-house and wood-panel doors on some San Mateo blocks weigh more than a standard steel door. Heavier doors mean bigger springs and more careful balancing.
- Access and clearance. A tight garage with low headroom or parked cars crowding the door takes more setup time. We factor that into the quote rather than surprising you at the end.
- Brand and part availability. A Clopay or Amarr door with a standard spring size is straightforward to match. A Raynor or Wayne Dalton door sometimes needs a specific spring to keep the door balanced to the manufacturer’s spec, and that matching work takes knowledge of the brand, not a lucky guess.
Why Spring Pricing Varies in San Mateo
Spring replacement costs land in a range rather than a single number for reasons that are specific to this city and its housing. San Mateo has a wide mix of home styles – mid-century single-story homes, older bungalows, and newer infill builds – and each of those carries a different door weight, different spring arrangement, and different headroom in the garage. A door that’s seen a lot of open-and-close cycles in a busy household wears differently than one on a quieter street.
The mild Bay Area climate helps here. Springs don’t rust out the way they do in wetter, saltier regions, so a lot of what we replace in San Mateo is simply worn metal from use, not corrosion. That’s good news: the spring itself is often the main cost, with less money going into fighting rusted hardware. What we do see is doors that haven’t been serviced in years, where the spring has been slowly losing tension and the opener has been working harder to compensate. When that finally lets go, the spring job sometimes comes with a worn opener alongside it.
We handle doors and openers as our only trade. That focus means we can look at a Clopay door with a LiftMaster opener and diagnose the whole system in one pass, rather than referring out the opener side of the problem. It also means we can give you an honest repair-or-replace read, because we’re not chasing a sales quota on a new door.
Repair or Replace: Which Makes Sense for Your Door?
For most San Mateo homeowners, spring replacement is the clear answer. A spring is a wear part, like a brake pad. It’s meant to be replaced, and doing so keeps the door and opener in service. Replacement of the whole door only makes sense when the door body itself is failing – cracked panels, a bent track you can’t realign, or a 30-year-old wood door with rot. In those cases we’ll be straight with you about the math, including what a new door installation typically costs and whether the repair money is better spent toward it.
If your door is a candidate for a full replacement rather than a spring fix, a Quarry Garage Door Repair technician can walk you through the options across Amarr, Clopay, and Wayne Dalton door lines. That same expertise carries over to opener work, so a spring failure that’s stressed the motor gets caught before it becomes a separate problem.
How to Save on Spring Replacement
- Replace both springs at once when they’re the same age. Paying once for a matched pair usually costs less over the life of the door than two separate visits for springs that fail within months of each other.
- Ask for the written estimate before work starts. A free estimate that itemizes springs, cables, and any optional hardware lets you choose. Ours is free, and you can call (877) 373-8927 to set it up.
- Get the rollers checked at the same visit. Rollers are inexpensive relative to a second call-out and are the part we most often find worn alongside a spring.
- Don’t wait for a failure. A door that’s gotten noticeably heavier to lift or that hangs when the opener runs is telling you the spring is fading. Catching it early usually means a straightforward spring job rather than a spring-and-opener double repair.
- Keep it maintained. A yearly look at cables, hinges, and spring tension keeps the whole system in balance and prolongs spring life.
Why Spring Repair Isn’t a DIY Job
Torsion springs store a large amount of energy, and the tools that hold them in place under tension are specialized for a reason. A spring that lets go while someone is adjusting it can cause serious injury. Cables under tension carry the same risk. We don’t recommend homeowners attempt spring or cable work themselves, and we’d rather you call and have it done safely than take a chance. That’s why our technicians train specifically on spring systems and use proper winding bars and safety procedures on every job.
That safety focus is part of why we stay a single-trade specialist. Every visit is a garage door visit, and every technician knows the tension, the tools, and the failure points. When you call for a spring, that’s the only type of job on our schedule.
What Happens When You Call
We answer 24/7 at (877) 373-8927. When you call, we’ll ask what’s happening with the door – whether it’s fully down, stuck open, or the opener is just running without lifting – so we can bring what’s needed. Fast dispatch from 7am to 7pm Sunday through Friday gets a technician to your San Mateo home, and we’re closed Saturday.
At the visit, we inspect the springs, cables, drums, and rollers, then give you a written estimate before any work begins. You’ll know the exact dollar amount, what we recommend and why, and what’s optional. If a simpler fix will do the job, we’ll say so. If replacing both springs is the better call, we’ll explain it in plain terms. Same-day service is often possible, and the estimate is always free.
We work on the brand already on your door, which matters when a spring has to match a Clopay, Amarr, Wayne Dalton, or Raynor door to the right tension. Brand fluency means a correct match the first time, not a return visit to adjust tension that’s off. That’s the difference between a generalist and a garage door specialist.
FAQs – Spring Replacement Cost
How much does spring replacement cost in San Mateo?
One spring typically costs $210 to $400, and a matched pair about twice that. The written estimate sets the final price. Call (877) 373-8927 for a free estimate.
Do I need to replace one spring or both?
Most doors with two springs need both replaced, since they wear at the same rate, which runs roughly $420 to $800 as a typical estimate. If one spring is clearly newer, we may recommend a single. Call (877) 373-8927 and we’ll give you a straight read.
Can you come today?
Same-day service is often possible for spring failures. We answer 24/7, and fast dispatch runs from 7am to 7pm Sunday through Friday. Call (877) 373-8927 to check availability and get a free estimate.
Is it cheaper to repair or replace a garage door with a broken spring?
Repairing the spring is almost always cheaper at $210 to $400 per spring, versus $825 to $2595 for a new door. Replacement only makes sense when the door body is failing. Call (877) 373-8927 and we’ll tell you which actually fits your door.
What else might need replacing when a spring breaks?
Cables ($155 to $295) and rollers ($130 to $260) are the most common add-ons, and a stressed opener may need repair at $140 to $380. We’ll list anything optional in the written estimate. Call (877) 373-8927 for a free look.
Getting a Straight Answer on Spring Pricing
Spring replacement in San Mateo is a repair with a real, knowable cost. One spring typically lands at $210 to $400, a matched pair about twice that, and the written estimate you get after an inspection is the price you pay. We work on the door and opener brands you already have, we handle springs, cables, openers, and full installations as one garage-door-only trade, and we’ll give you an honest repair-or-replace read without pushing either outcome.
Call (877) 373-8927 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For spring work or any other San Mateo garage door repair, a technician can be on their way with the right parts and the right diagnosis the first time.
Pricing reflects the San Mateo market as of 2026. Quarry Garage Door Repair offers free estimates – call (877) 373-8927.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Eric Lawson"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Gilbert Hernandez"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Lisa Brooks